Tiltwall News - Tiltwall Construction information for General Contractors and the Public
 

 

 Search Tiltwall.com
 
 

Tiltwall Construction Articles
Tiltwall Construction: A General Contractor's Approach to Innovative Commercial Building Construction
Tiltwall: An Old Idea for General Contractors With New Innovations
What is Tiltwall Construction? How Are Tiltwall Buildings Constructed?
Precast Concrete, Tilt-up Construction and Tilt wall: What's the Difference in These Terms?
Why do Design / Build Contractors Choose Tiltwall Construction?
When Does Concrete and Tiltwall Construction Make More Sense than Steel Buildings?
Steel and Tiltwall Together: Using the Strengths of Each
Tiltwall Construction Delivers Theater Two Weeks Ahead of Schedule
Innovations in Tiltwall Construction Help Contractors Overcome Challenges
Construction Cost Fluctuations Make Tiltwall Construction a Better Choice Than Ever

 

Tiltwall Innovations

 

Innovations in Tiltwall Construction Help Contractors Overcome Challenges

The key to successful commercial construction is balancing quality with cost and schedule. While this is always a challenge, external forces like local building codes often make the balance even more difficult to achieve.

The construction team decided the Northern Tool & Equipment store would be a tiltwall concrete building very early in the design process because tiltwall provided substantial cost savings and made the proposed building schedule much more feasible. When the decision was made, however, another issue arose. Local building codes required new commercial buildings to have 100% masonry facades. The solution was a product called Brick Snap. This product allowed construction crews to attach a brick wall facade to the tiltwall construction panels as the panels were cast rather than constructing a facade in a separate step after the walls were cast and stood.
The construction team decided the Northern Tool & Equipment store would be a tiltwall concrete building very early in the design process because tiltwall provided substantial cost savings and made the proposed building schedule much more feasible. When the decision was made, however, another issue arose. Local building codes required new commercial buildings to have 100% masonry facades. The solution was a product called Brick Snap. This product allowed construction crews to attach a brick wall facade to the tiltwall construction panels as the panels were cast rather than constructing a facade in a separate step after the walls were cast and stood.

Such was the case with Northern Tool & Equipment Company's retail store in Lewisville, Texas.

The construction team, headed up by general contractor Bob Moore Construction in Arlington, Texas, decided this would be a tiltwall concrete building very early in the design process. Tiltwall provided substantial cost savings and made the proposed building schedule much more feasible than traditional a CMA concrete building would allow for. Steel buildings were competitive in cost and schedule to tiltwall, but local zoning did not allow for metal structures in this location and the client wanted the superior quality of a concrete building. Tiltwall was clearly the construction method of choice.

When the decision was made, however, another issue arose. Local building codes required new commercial buildings to have 100% masonry façades. "We built a Northern Tool and Equipment retail store the year before in Grand Prairie," said Curt Hellen, Senior Project Manager for Bob Moore Construction, "and we finished that with paint. We couldn't do this in Lewisville, however, because local codes required a masonry finish to the building."

In previous years the alternative would have been to build a masonry façade along the walls' exteriors. This would have driven up construction costs and added crucial days to the schedule, all but erasing the benefits of tiltwall construction.

"We had to come up with a more innovative solution," said Hellen.

To use the Brick Snap system, workers placed individual masonry tiles connected by plastic trays into the tiltwall construction panel forms. The tiles, coated in wax to ensure their faces didn't stick to the concrete, form the walls' bricks while the trays define the mortar pattern between the bricks. Once the work crews set up the tiles and trays, they poured the tiltwall panels and allowed them to cure, then stood and secured the panels to form the walls. Workers then washed the walls' exteriors with warm water to remove the trays and wax and leave the masonry tiles in the finished brick pattern.
To use the Brick Snap system, workers placed individual masonry tiles connected by plastic trays into the tiltwall construction panel forms. The tiles, coated in wax to ensure their faces didn't stick to the concrete, form the walls' bricks while the trays define the mortar pattern between the bricks. Once the work crews set up the tiles and trays, they poured the tiltwall panels and allowed them to cure, then stood and secured the panels to form the walls. Workers then washed the walls' exteriors with warm water to remove the trays and wax and leave the masonry tiles in the finished brick pattern.

The solution was found in a product from Scott System called Brick Snap. This product allowed construction crews to attach a brick wall façade to the tiltwall construction panels as the panels were cast rather than constructing a façade in a separate step after the walls were cast and stood.

To use the Brick Snap system, workers placed individual masonry tiles connected by plastic trays into the tiltwall construction panel forms. The tiles, coated in wax to ensure their faces didn't stick to the concrete, form the walls' bricks while the trays define the mortar pattern between the bricks.

Once the work crews set up the tiles and trays, they poured the tiltwall panels and allowed them to cure, then stood and secured the panels to form the walls. Workers then washed the walls' exteriors with warm water to remove the trays and wax and leave the masonry tiles in the finished brick pattern.

The Brick Snap system worked - the project satisfied the city's requirements while maintaining the cost and speed advantages that tiltwall construction provides. "Our team took a very innovative approach to solving the various challenges we faced in the design and planning phases," said Hellen. "The steps we took were very effective, and were successful at holding down the overall cost of the project."

The Brick Snap system is another example of how the construction industry is driving innovations to manage costs and schedule without undercutting quality - the key benefits of tiltwall concrete construction. As these creative solutions are improved and implemented, tiltwall construction will continue to evolve into the construction methodology of choice for an ever-growing circle of commercial building applications.

This photo shows the Brick Snap system. The individual masonry tiles connected by plastic trays form the brick wall pattern in the tiltwall construction panel forms. Once the work crews set up the tiles and trays, they poured the tiltwall panels and allowed them to cure, then stood and secured the panels to form the walls. Workers then washed the walls' exteriors with warm water to remove the trays and wax and leave the masonry tiles in the finished brick pattern.
This photo shows the Brick Snap system. The individual masonry tiles connected by plastic trays form the brick wall pattern in the tiltwall construction panel forms. Once the work crews set up the tiles and trays, they poured the tiltwall panels and allowed them to cure, then stood and secured the panels to form the walls. Workers then washed the walls' exteriors with warm water to remove the trays and wax and leave the masonry tiles in the finished brick pattern.

The finished product - the store's walls have a 100% masonry facade in a two-toned brick pattern that looks aesthetically pleasing and conforms to local building codes. Innovations like Brick Snap make tiltwall concrete construction the method of choice for more and more commercial construction building projects.
The finished product - the store's walls have a 100% masonry facade in a two-toned brick pattern that looks aesthetically pleasing and conforms to local building codes. Innovations like Brick Snap make tiltwall concrete construction the method of choice for more and more commercial construction building projects.
The finished product - the store's walls have a 100% masonry facade in a two-toned brick pattern that looks aesthetically pleasing and conforms to local building codes. Innovations like Brick Snap make tiltwall concrete construction the method of choice for more and more commercial construction building projects.

 

Return to articles index

 

  
 


Tiltwall.com - Tiltwall Construction information for General Contractors and the Public